Skip to main content

Beta TX 670 DISCO Prepreg

August 22, 2017

Beta TX670 DISCO is a prepreg sold in sheet format. This special format allows for simpler and faster layups. Beta TX670 DISCO Prepreg has a 0°,+/-60° orientation, is quasi-isotropic within each ply, and comes with an engineered cut pattern that improves drapability.

Benefits:

  • Discontinuous sheets reduce layup effort and improve conformability.
  • Quasi-isotropic within each ply, providing simpler and faster layup.
  • Will produce consistent laminate thickness for even heat-up and meeting design targets.
  • Exceptionally long out-life at room temperature of 6 months.
  • Has outstanding toughness, high glass transition temperature, and stability at high temperatures.
  • Exceptionally low shrinkage improves tool surface quality and reduces residual laminate stresses.
  • Excellent surface finish and vacuum integrity after machining.
  • Very low moisture absorption in comparison to epoxy tools.
beta

About

Airtech Asia, Ltd. is a division of Airtech Advanced Materials Group, the largest manufacturer of vacuum bagging and composite tooling materials for prepreg/autoclave, resin infusion, and wet lay-up processes up to 799°F (426°C).

Featured Posts

Contact info

  • Address: No. 161 of Anyuan Road,
    Chagugang County, Wuqing District,
    301721, Tianjin, P.R. China

  • Phone: +86 22 8862 9800

  • Email: Airtech-Asia