| Airtech Asia

Filmcote® 1524

October 25, 2017

Filmcote® 1524 is an engineered film developed as a replacement for release liquids on the surface of mold tools. Filmcote® 1524 remains on the part surface after demold providing protection from damage or contamination during subsequent process.

Airweave® UHT 800

Airweave® UHT 800 is a non-woven blended, fiberglass breather.

Beta TX 670 DISCO Prepreg

August 22, 2017

Beta TX670 DISCO is a prepreg sold in sheet format. This special format allows for simpler and faster layups. Beta TX670 DISCO Prepreg has a 0°,+/-60° orientation, is quasi-isotropic within each ply, and comes with an engineered cut pattern that improves drapability.

Airflow 65R

Airflow 65R can be used as an autoclave or oven hose. The outer ply is silicone rubber that encases a flexible steel tube that prevents collapse and hose separation.

Toolfusion® 1

Submitted by admin on February 8, 2017

Read more about Toolfusion® 1

Airdraw 2 and Wrightlon® 7400

Airdraw 2 and Wrightlon® 7400 Embossed have embossed pattern that provides network of air passageways, eliminating the need for a separate layer of breather.

Wrightlon® 4600

Wrightlon® 4600 release film is a low cost high temperature film for use in flat or limited curvature molding applications up to 380°F (193°C).

BBH 1080 Hose

BBH 1080 is a durable high temperature and high pressure autoclave hose. The hose construction consists of an inner flexible stainless steel conduit over-wrapped with a stainless steel braid.

Masterflex “S” series

The Masterflex “S“ series is a flexible spiral square tube used as a reinforcing hat section stiffener on the backside of the tool face. Masterflex stiffens the tool face to avoid dimensional stability problems.

Stretchlon® 700

Stretchlon® 700 vacuum bag film is a high elongation elastomeric film which is designed for cures up to 385°F (195°C). It is particularly suitable for applications where softness and elongation are required.

Subscribe to

About

Airtech Asia, Ltd. is a division of Airtech Advanced Materials Group, the largest manufacturer of vacuum bagging and composite tooling materials for prepreg/autoclave, resin infusion, and wet lay-up processes up to 799°F (426°C).

Contact info

Address: No. 161 of Anyuan Road,
Chagugang County, Wuqing District,
301721, Tianjin, P.R. China
Phone: +86 22 8862 9800
Email: